A-Z of telnet

A-Z of telnet TELNET COMMANDS.

The following commands describes the how to get to the gateway's telnet server by a telnet command line interface.
A complete listing of this commands can be found on the support@ibmelectronics HELP- Lists all the commands. Prompt

RESET - Terminates the session goes to gateway.
LOGOUT - Terminates gateway.
LOGFILE - ENA - Starts logging procedures on gateway.
LOGFILE - DIS - Stops logging procedures on gateway.
SHOW BOOT - VERSION - Returns the boot to gateway.
SHOW BOOT - TFTP - FILE - Returns the name of the application file the gateway will request from the TFTP server.
CHANGE BOOT - TFTP - FILE - Configures the name of the application file that the gateway will request from the TFTP server.
CHANGE BOOT - TFTP - IP - Configures the IP address of the TFTP server used by the gateway to request an application file.
SHOW - TASK - Returns a list of current tasks and their ID numbers.
SHOW - STAT - PORT TYPE - Returns the current status of the requested port.
CHANGE - TFTP - FILE - Configures the name of the configuration file that gateway will request from the TFTP server.
CHANGE - TFTP - IP - Configures the IP address of the TFTP server used by the gateway to request a configuration files.
SET - PORT# - UP - Starts a port.
SET - PORT# - DOWN - Stops a port.
SUBADDRESS# - UP - Start suborders.
SUBADDRESS# - DOWN - Stops a suborders.

A-Z of telnet